Created due to demand by you the customers, this set of Terrain pieces for print is Imperial Terrain's version of an Imperial Forward Operating Outpost. These wall segments are not intended to be permanent, but to be dropped in place for use temporarily. Typically deployed in the Mid or Outer rim where Forward bases need to be quickly established, these walls are what Army Commanders across the galaxy turn to.
Height 1 along the length of the wall to keep Speeder bikes from penetrating perimeters. Firing holes along the bottom and top of the walls to allow defenders excellent protection.
Do be warned, Jedi and Infantry with grappling capability have attempted to infiltrate over the top of the walls.
All Wall sections are ready for magnets with magnet holes.
- Wall Section A (100mm in length, about 4 inches, Height 1 Tall, a little over 6 inches at max)
- Wall Section B (100mm in length, about 4 inches, Height 1 Tall, a little over 6 inches at max)
- 60 Degree Corner
- Left Gate Wall
- Right Gate Wall
- Gate Version A
- .20 or .24 Layer Height
- 2 Perimeters
- 5-10% Infill
- No Supports or Rafts needed
All files can be printed on a 200 x 200 print bed.
QUESTIONS & ANSWERSAsk a Question
Have a Question?
Hello!! Do you plan to make a 90 degree corner of this wall?
Hi! We don't plan on making a 90 degree corner for this set. The Imperial Walls 2.0 is the updated version, which includes the ability to connect walls using openlock clips, allowing for the corner to be created if desired. https://imperialterrain.com/products/imperial-walls-2-0-digital-stl-files
Hello, will I be able to print it with a printer's 23mm bed (ender 3) ?
Yes it will.